NEWS CENTER


Discussion on the Connection of Actuator and Valve Body of Pneumatic Ball Valve


Release time:

2021-06-05

As a level of pneumatic ball valve installed in the pipeline system, its effect is first reflected in the media activity in the pipeline when the cut-off effect. A lot of time, pneumatic ball valve in the pneumatic actuator can play a key effect. When the pipeline fluid medium is agile, it can carry out appropriate control effect with the conditioning mechanism to control the transportation of the pipeline medium. This is the current situation.Pneumatic ball valveThe primary feature.

Discussion on the Connection of Actuator and Valve Body of Pneumatic Ball Valve

As a level of pneumatic ball valve installed in the pipeline system, its effect is first reflected in the media activity in the pipeline when the cut-off effect. A lot of time, pneumatic ball valve in the pneumatic actuator can play a key effect. When the pipeline fluid medium is agile, it can carry out appropriate control effect with the conditioning mechanism to control the transportation of the pipeline medium. This is the current situation.Pneumatic ball valveThe primary feature.
However, due to the combination of pneumatic actuator and ball valve body, the performance of the valve itself has also been improved. Take the ball valve for example, because the connection of the actuator makes the fitting and excessive between the ball opening and closing parts and the valve seat flow very well when the valve is cut off, and the fitting is relatively accurate.
Moreover, in the pipeline, the effect of the pneumatic performance mechanism is to compress the air into the performance part through the introduction of gas, and power is generated to drive the valve stem or opening and closing part connected with the performance part. This drives the performance device, which also drives the valve and has the effect of throttling the pipeline, which is also the characteristic of the pneumatic valve.
Pneumatic ball valve is widely used in natural gas, oil, chemical industry, mining and other industries to control and regulate the flow of media, which can be used with automatic pneumatic appearance matching each other.
Pneumatic ball valve ball is elastic, not very hard. Its ball and valve seat sealing ring are made of metal materials. If only one inch relies on its own pressure to apply pressure, it cannot meet the requirements of sealing. This requires external force to meet the requirements of sealing. Pneumatic ball valve is more suitable for high temperature and high pressure medium.